Select Store:
Select Currency:

Sick AFM60E-TEKK004096 (1059602)

Product Summary

Sick AFM60E-TEKK004096 (1059602)
Manufacturer: Sick
Manufacturer part number: 1059602
SKU: 196952
Weight(kg): 0.4000

Click here to check availability

Pricing - Condition Manufacturer New

€599.24 excl VAT
€577.36 excl VAT
    • High-resolution absolute encoders with up to 30 bits (AFM60) or up to 18 bits (AFS60)
    • Face mount flange, servo flange, blind or through hollow shaft
    • SSI, SSI + Incremental or SSI + Sin/Cos interface
    • Programmable resolution and offset (dependent on type)
    • Connection system: M12, M23 connector or cable outlet
    • Enclosure rating: IP 67 (housing), IP 65 (shaft)
    • Operating temperature: -30 °C to +100 °C (depends on type)

Your benefits

  • Programmability of the encoders means less storage, greater machine availability and easy installation
  • Precise positioning due to high resolutions
  • Large selection of mechanical interfaces and electrical contacting possibilities: Suitable for all applications
  • Suitable for applications with limited space requirements (extremely short installation depth of 30 mm)
  • Very good rotation accuracy due to increased bearing distance
  • One programming tool and software with automatic encoder detection for AFS60/AFM60/DFS60

 

Performance

Max. number of steps per revolution: 4,096
Max. number of revolutions: 4,096
Resolution power: 4,096 x 4,096
Resolution: 12 bit x 12 bit
Error limits: ± 0.3 °
Repeat accuracy: 0.002 °
Measuring step deviation: ± 0.2 °
Initialization time: 50 ms 1)
1) Valid positional data can be read once this time has elapsed  
Mechanical data
Mechanical interface: Through hollow shaft
Shaft diameter: 12 mm
Start up torque: 0.8 Ncm (20 °C)
Operating torque: 0.6 Ncm (20 °C)
Maximum operating speed: 9,000 /min 1)
Moment of inertia of the rotor: 40 gcm²
Bearing lifetime: 3.0 x 10^9 revolutions
Max. angular acceleration: 500,000 rad/s²
Permissible movement axial static/dynamic: ± 0.5 mm, ± 0.2 mm
Permissible movement radial static/dynamic: ± 0.3 mm, ± 0.1 mm
Type of mounting shaft: Through hollow shaft
1) Self warming of 3.3 K per 1000 revolutions/min when applying note working temperature range  
Electrical data
Power consumption: 0.5 W (without load)
Operating voltage range: 4.5 V DC ... 32 V DC
Maximum output frequency: 200 kHz
Load resistance min.: 120 Ω
MTTFd: mean time to dangerous failure: 250 a (EN ISO 13849-1) 1)
Connection type: Cable, 12-pin, radial, 1.5 m 2)
Code type: Gray
Code sequence: CW/CCW, parameter adjustable
Reverse polarity protection: 1
1) This product is a standard product and does not constitute a
safety component as defined in the Machinery Directive.
Calculation based on nominal load of components, average ambient
temperature 40°C, frequency of use 8760 h/a. All
electronic failures are considered hazardous. For more information, see document no. 8015532.  2) Not UL certified  
Interfaces
Electrical interface: SSI/Gray + Sin/Cos, 1.024 Perioden
Interface signals: Clock +, Clock -, Data +, Data-, Sin +, Sin - , Cos + , Cos -: analog, differential
Clock frequency: 1 MHz 1)
SET (electronic adjustment): H-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
CW/CCW (counting sequence when turning): L-active (L ≡ 0 - 1,5 V, H ≡ 2,0 - Us V)
Signal before differential generation: ± 20 %
Signal offset: 2.5 V ± 10 %
1)   
Ambient data
EMC: (according to EN 61000-6-2 and EN 61000-6-3) 1)
Enclosure rating: IP 65 (according to IEC 60529), IP 65 (according to IEC 60529), shaft side
Permissible relative humidity: 90 % (condensation of the optical scanning not permitted)
Working temperature range: 0 °C ... 85 °C
Storage temperature range: -40 °C ... 100 °C, without package
Resistance to shocks: 50 g, 6 ms (according to EN 60068-2-27)
Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
1)   
Products specifications
Manufacturer Sick
Manufacturer category Sick AFM60A