Beam coding: |
- |
Reduced resolution: |
- |
Configuration method: |
hard wired |
Extension connection: |
- |
Safe device communication via EFI/SDL: |
- |
Functions-Receiver |
Restart interlock: |
 |
Restart interlock (delivery status): |
Internal |
External device monitoring: |
 |
External device monitoring (delivery status): |
Deactivated |
Beam coding: |
- |
PSDI mode with: |
Flexi Soft |
Reduced resolution: |
- |
Configuration method: |
hard wired |
Extension connection: |
- |
Safe device communication via EFI/SDL: |
- |
Technical Data-Sender |
Protective field height: |
600 mm |
Resolution: |
14 mm |
Housing length: |
817 mm |
Housing diameter: |
52 mm |
Safety integrity level: |
SIL3 (IEC 61508), SILCL3 (IEC 62061) |
Category: |
category 4 (EN ISO 13849) |
Performance level: |
PL e (EN ISO 13849) |
PFHd: |
1.5 * 1E-08 |
TM (Mission Time): |
20 a |
Enclosure rating: |
IP 67 IP 66 IP 65 |
Protection class: |
III (IEC 536:1976) |
Ambient operating temperature from ... to: |
0 °C ... 55 °C |
Ambient temperature operation, heater: |
-30 °C ... 15 °C, with heating switched on |
Vibration resistance (checked to): |
5 g (IEC 60068-2-6) |
Oscillation frequency from ... to: |
10 Hz ... 55 Hz |
Shock resistance: |
10 g, 16 ms (IEC 60068-2-29) |
Supply voltage typical, from, to: |
24 V DC, 19.2 V DC, 28.8 V DC |
Power consumption: |
≤ 350 mA |
Supply voltage heating: |
230 V AC |
Power consumption heating: |
70 W / -30 °C |
Wave length: |
950 nm |
Connection type: |
PVC cable, 15 m |
Maximum connection cable cross-section: |
0.25 mm2 |
Material, end caps: |
Stainless steel |
Material, Plastic tube: |
PMMA |
Material, Compensation element (membrane): |
PA 6 |
Material, PG connector: |
PA 6 |
Technical Data-Receiver |
Protective field height: |
600 mm |
Resolution: |
14 mm |
Scanning range from ... to: |
1 m ... 4 m |
Housing length: |
817 mm |
Housing diameter: |
52 mm |
Safety integrity level: |
SIL3 (IEC 61508), SILCL3 (IEC 62061) |
Category: |
category 4 (EN ISO 13849) |
Performance level: |
PL e (EN ISO 13849) |
PFHd: |
1.5 * 1E-08 |
TM (Mission Time): |
20 a |
Enclosure rating: |
IP 67 IP 66 IP 65 |
Protection class: |
III (IEC 536:1976) |
Ambient operating temperature from ... to: |
0 °C ... 55 °C |
Ambient temperature operation, heater: |
-30 °C ... 15 °C, with heating switched on |
Vibration resistance (checked to): |
5 g (IEC 60068-2-6) |
Oscillation frequency from ... to: |
10 Hz ... 55 Hz |
Shock resistance: |
10 g, 16 ms (IEC 60068-2-29) |
Response time without beam coding: |
≤ 14 ms |
Supply voltage typical, from, to: |
24 V DC, 19.2 V DC, 28.8 V DC |
Power consumption: |
≤ 450 mA |
Maximum switching current: |
500 mA |
Supply voltage heating: |
230 V AC |
Power consumption heating: |
70 W / -30 °C |
Wave length: |
950 nm |
Connection type: |
PVC cable, 15 m |
Maximum connection cable cross-section: |
0.25 mm2 |
Material, end caps: |
Stainless steel |
Material, Plastic tube: |
PMMA |
Material, Compensation element (membrane): |
PA 6 |
Material, PG connector: |
PA 6 |