Technical data | Number of lines/steps: | 512 |
Type: | Incremental encoder |
Shaft / Flange design: | Solid shaft, servo flange |
Shaft diameter: | 6 mm |
Interface: | 10 ... 32 V, TTL/RS422 |
Connection type: | Connector, M23, 12-pin, radial |
Number of lines: | 512 |
Moment of inertia of the rotor: | 13 gcm2 |
Measuring step: | 90°/number of steps |
Reference signal, number: | 1 |
Reference signal, position: | 90° electronically & logically interlocked with A+B |
Measuring step deviation: | 45/Z ° |
Max. operating speed with shaft seal: | 6,000 1/min |
Max. operating speed without shaft seal: | 10,000 1/min |
Max. angular acceleration: | 5 x 105 rad/s2 |
Operating torque with shaft seal: | 1 Ncm |
Operating torque without shaft seal: | 0.1 Ncm |
Start up torque with shaft seal: | 1.5 Ncm |
Start up torque without shaft seal: | 0.2 Ncm |
Permissible shaft loading axial: | 10 N |
Permissible shaft loading radial: | 20 N |
Ambient operation temperature, min ... max: | -20 °C ... +85 °C |
Permissible relative humidity: | 90% |
EMC: | EN 61000-6-2, EN 61000-6-3 |
Resistance to shocks: | 30/11 g/ms |
Resistance to vibration: | 20/10 ... 150 g/Hz |
Protection class housing side: | IP 67 |
Enclosure rating flange: | IP 65 |
Supply voltage min ... max: | DC 10 ... 30 V |
Supply current: | 100 mA |
Load current: | 20 mA |
|