Product features | Interface features: | Zero-pulse 90° |
Remark: | Collets for 6, 8, 10, 12 mm and 1/4", 3/8" and 1/2" as accessories, separate order item. For 15 mm shaft diameter collet is not needed. |
|
Technical data |
Number of lines/steps: | 3,150 |
Type: | Incremental encoder |
Shaft / Flange design: | Blind hollow shaft |
Shaft diameter: | 6, 8, 10, 12, 15 mm, 1/4", 3/8", 1/2" |
Interface: | 10 ... 30 V, HTL/Push pull |
Connection type: | Connector, M23, 12-pin, radial |
Number of lines: | 3,150 |
Diameter: | 60 mm |
Measuring step: | 90°/number of steps |
Error limits binary number of steps: | 0.035 ° |
Error limits non-binary number of steps: | 0.046 ° |
Max. operating speed: | 3,000 1/min |
Operating torque: | 0.4 Ncm |
Start up torque: | 0.6 Ncm |
Permissible movement of the drive element, axial static: | ± 0.5 mm |
Permissible movement of the drive element, axial dynamic: | ± 0.2 mm |
Permissible movement of the drive element, radial static: | ± 0.3 mm |
Permissible movement of the drive element, radial dynamic: | ± 0.1 mm |
Ambient operation temperature, min ... max: | -20 °C ... +85 °C |
Ambient storage temperature, min ... max: | -40 °C ... +100 °C |
Permissible relative humidity: | 90% |
Resistance to shocks: | 50/11 g/ms |
Resistance to vibration: | 20/10 ... 2000 g/Hz |
Enclosure rating: | IP 65 |
Supply voltage min ... max: | DC 10 ... 32 V |
Supply current: | 100 mA |
Load current: | 60 mA |
Operation of zero-set: | >= 100 ms |
Initialisation time after power on: | 40 ms |
|