Select Store:
Select Currency:

Sick SKS36S-HFA0-K02 (1036556)

Product Summary

SKS36S-HFA0-K02 MOTORFEEDBACK HIPERFACE 128 Sine/Cosine Periods *** Bei der Inbetriebnahme ist das Implementierungshandbuch (Bestell-Nr. 8012332) zu beachten.
Manufacturer: Sick
Manufacturer part number: 1036556
SKU: 115387
Weight(kg): 0.0624

Click here to check availability

Pricing - Condition Manufacturer New

€187.99 excl VAT
€208.88 excl VAT


  • Motor feedback systems for the standard performance range
  • 128 sine/cosine periods per revolution
  • Absolute position with a resolution of 4,096 increments per revolution and 4,096 revolutions with the multiturn system
  • Programming of the position value and electronic type label
  • HIPERFACE® interface
  • Integrated version and stand-alone design
  • Certified according to SIL2/PL d (only valid for SKS36S/SKM36S-H...)
  • Conforms to RoHs
  • Your benefits

  • The small dimension allows manufacturers of low-power and minimal-power motors to considerably reduce the size of their motors
  • The stand-alone version is ideally suited as a master and path encoders
  • The SKS/SKM36 motor feedback systems have strongly penetrated the drive technology market
  • The consistent mechanical components in SEK/SEL37 allow for a high degree of flexibility with various encoder systems

Safety-related parameters
Safety integrity level:SIL2 (IEC 61508), SILCL2 (IEC 62061)
Category:3 (EN ISO 13849)
Performance level:PL d EN ISO 13849 1)
TM (mission time):20 a (EN ISO 13849)
PFHD: probability of dangerous failure per hour:1.3 * 1E-08 2)
MTTFd: mean time to dangerous failure:100 a (EN ISO 13849)
1) For more detailed information on the exact configuration of your machine/unit, please consult your relevant SICK branch office.  2) The values displayed apply to a diagnostic degree of coverage of 90%, which must be achieved by the external drive system  
Number of sine/cosine periods per revolution:128
Number of the absolute ascertainable revolutions:1 (Singleturn)
Total number of steps:4,096
Measuring step:2.5 angular seconds (at interpolation of the sine/cosine signals with e.g. 12 Bit)
Error limits for the digital absolute value:± 320 angular seconds (via RS485)
Integral non-linearity typ.:± 80 angular seconds (Error limits for evaluating sine/cosine period)
Differential non-linearity:± 40 angular seconds (Non-linearity within a sine/cosine period)
Operating speed:12,000 /min, up to which the absolute position can be reliably produced
Available memory area:1,792 Byte (EEPROM 2048)
Mechanical data
Flange type/stator coupling:Spring mounting plate
Dimensions:See dimensional drawing
Mass:0.07 kg
Moment of inertia of the rotor:4.5 gcm²
Maximum angular acceleration:500,000 rad/s²
Operating torque:0.2 Ncm
Start up torque:0.3 Ncm
Permissible shaft movement, radial, static:± 0.1 mm
Permissible shaft movement, radial, dynamic:± 0.05 mm
Permissible shaft movement, axial, static:± 0.2 mm
Permissible shaft movement, axial, dynamic:± 0.1 mm
Life of ball bearings:3.6 x 10^9 revolutions
Connection type:Connector, 8-pin, radial
Shaft version:Tapered shaft
Electrical data
Electrical interface:HIPERFACE
Operating voltage range/supply Voltage:7 V DC ... 12 V DC
Recommended supply voltage:8 V DC
Operating current:60 mA
Output frequency for sine/cosine signals:0 kHz ... 65 kHz
Without load  
Type of code for the absolute value:Binary
Code sequence:Increasing, for clockwise shaft rotation, looking in direction "A" (see dimensional drawing)
Interface signals:Process data channel SIN, REFSIN, COS, REFCOS: analog, differential
parameter channel RS 485: digital
Ambient data
Working temperature range:-20 °C ... 110 °C
Storage temperature range:-40 °C ... 125 °C, without package
Relative humidity / Condensation:90 %, Condensation not permitted
Resistance to shocks:100 g, 6 ms (according to EN 60068-2-27)
Resistance to vibration:50 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
EMC:According to EN 61000-6-2 and EN 61000-6-3 1)
Enclosure rating:IP 50, according to IEC 60529, with mating connector inserted and closed cover
1) The EMC according to the standards quoted is achieved when the motor feedback system is mounted in an electrically conductive housing, which is connected to the central earthing point of the motor controller via a cable screen. This is also where the GND (0 V) connection of the power supply voltage is linked to earth. Users must perform their own tests when other screen designs are used.  
Products specifications
Manufacturer category Sick SKS36
Manufacturer Sick